BOSTON GEAR M2428-40 Sleeve Bearings

Weight:0.63 kg; C:12.8 kN; s1:30.5 mm; Recommended tightening torque for set screw:5.5 Nm; B1:43.5 mm; S:17 mm; L:65 mm; Designation of open end cover:SCOE204-12; H2:64 mm; B:34 mm;

J:104 mm; C0:29.2 kN; A:66 mm; S:22.2 mm; H1:14 mm; s1:27.8 mm; N:M16; L1:47 mm; B:55.6 mm; Designation of bearing:UC211-34G2T04;

H1:12.8 mm; Designation of open end cover:SCOE205-25; d1:37.4 mm; Recommended tightening torque for set screw:5.5 Nm; L:139 mm; Designation of closed end cover:SCCE205; N:11mm; Z:64.5 mm; J:104.2 mm; T min.:-20 °C;

A1:30 mm; Z:58.4 mm; N:17mm; C0:15.2 kN; T max.:100 °C; S:17.5 mm; T min.:-20 °C; d:33.34 mm; J:127 mm; Designation of open end cover:SCOU207-21;

Brand:NTN; D:35 mm; Static load, C0:3.35 kN; rs min:0.3 mm; Fatigue limit load, Cu:0.15 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:6.8 kN; Min operating temperature, Tmin:-20 °C; Nlim (oil):24,000 rpm; Characteristic outer ring frequency, BPF0:3.14 Hz;

Bearing Family:Grip Tight Ball Bear; Retainer Type:Max Life Cage; Bearing Outer Ring Material:Steel; Flinger Type:INTERNAL RUBBER LIP; Housing Material:Polymer; Bearing Thread Type:UNC; Ball Bearing Housing Series:207 Series; Base to Center Height:Standard; Bearing Duty:Normal Duty; Ball Material:St

TypeAmmonium Nitrogen FertilizerEinecs No231-984-1Solubility in Water74.4 G/100 Ml (20°c)Ld502840 Mg/Kg, Rat (Oral)CAS-No7783-20-2Flash PointtNon-FlammableDensity1.769 g/cm3 (20 °c)Critical Relative Humidity79.2% (30°c)MarkingManufacture, Neutral, CustomerizeTrademarkAnhui RunquanTransport

N:25mm; L:292 mm; A:78 mm; Designation of housing:P216-; Weight:8.99 kg; T min.:-20 °C; d:80 mm; J:232 mm; H2:175 mm; G:M10x1;

H:124 mm; N:11,5mm; G:R1/8"; C:14 kN; C0:7.88 kN; e:19 mm; A2:38.7 mm; d:22.22 mm; A:29.3 mm; S:14.3 mm;

G1:M24; B1:51.1 mm; L3:40 mm; Designation of housing:EHE207-; Designation of bearing:EX207G2L3; C:25.7 kN; A2:40 mm; Weight:1.3 kg; T max.:100 °C; G:R1/8";

Mass:0.003 kg; Max operating temperature, Tmax:120 °C; Min operating temperature, Tmin:-20 °C; d:4 mm; Characteristic rolling element frequency, BSF:3.38 Hz; Brand:SNR; d1:6 mm; da max:6 mm; Static load, C0:0.47 kN; da min:5.6 mm;

T min.:-20 °C; A1:12 mm; H1:76 mm; L2:10 mm; Designation of open end cover:SCOE205-25; s1:30.9 mm; A:32 mm; Designation of housing:T205N-; L1:62 mm; P:150 mm;

G:M6x1; N:12mm; S:7.5 mm; L:95 mm; Designation of bearing:US205-14G2T20; Designation of open end cover:SCOU205-14; J:70 mm; d:22.22 mm; A2:35.5 mm; s1:13.5 mm;

C:12.8 kN; Z:22.3 mm; S:17 mm; B1:43.5 mm; Designation of housing:F204N-; Recommended tightening torque for set screw:5.5 Nm; N:12mm; C0:6.65 kN; d1:32.4 mm; G:M6x1;

r1s min:1.1 mm; Inventory:0.0; B:21 mm; Manufacturer Name:NTN; rs min:1.5 mm; Da max:93.5 mm; Static load, C0:93 kN; Fatigue limit load, Cu:11.3 kN; Max operating temperature, Tmax:120 °C; Characteristic cage frequency, FTF:0.42 Hz;